Language

+86-513 8659 8187

Brackish Water RO Membrane For Commercial

Home / Products / Commercial RO Membrane / Brackish Water RO Membrane For Commercial / Brackish Water Ro Membrane Elements BW-2540

Brackish Water Ro Membrane Elements BW-2540

BW-2540 is made of a brackish water reverse osmosis membrane produced by BANGTEC, suitable for desalination treatment of surface water, groundwater, municipal water, etc., with salt content less than 5000mg/L. It can be widely used in residential areas, office buildings, with high TDS of raw water, especially in medical rooms, small laboratories that require ultrapure water, and also drinking water on small sea yachts.

+86-513 8659 8187

[email protected]

Category Introduction

Brackish Water Ro Membrane For Commercial is a reverse osmosis membrane product designed specifically for industrial and large-scale water treatment systems. It is primarily used for the efficient treatment of brackish water, addressing common membrane fouling issues such as colloidal deposition, bioadhesion, organic adsorption, and inorganic salt scaling. Through material optimization, structural optimization, and surface modification, this product enhances its anti-fouling properties and long-term stability, ensuring efficient separation and purification capabilities in complex water environments. The core advantage of Brackish Water Ro Membrane For Commercial lies in its targeted engineering design, which significantly reduces maintenance requirements and extends service life, making it suitable for a variety of commercial water treatment applications.

Product Information

Model Stable Rejection  Min Rejection Permeate  Flow Effective Membrane Area
(%) (%) GPD(m³/d) ft2(m2)
BW-2540 99.6 99.5  750(2.84) 28(2.6)
Testing Conditions Operating pressure 225psi( 1.55MPa)
Test solution temperature 25 ℃
Test solution concentration (NaCl) 2000ppm
PH value  7-8
Recovery rate of a single membrane element 15%
Flow range of a single membrane element ±15%
Operating Conditions & Limits Maximum operating pressure 600 psi(4.14MPa)
Maximum temperature 45 ℃
Maximum feedwater flow Maximum feedwater flow: 6gpm(1.4 m3/h)
Maximum feedwater flow SDI15 5
Maximum concentration of free chlorine: <0.1ppm
Allowed pH range for chemical cleaning 3-10
Allowed pH range for feedwater in operation 2-11
Maximum pressure drop per element 15psi(0.1MPa)
Message Feedback