EN 
عربى
Category Introduction
The Sea Water RO Membrane series is suitable for desalination and deep treatment of seawater and high-concentration brackish water.
Delivering ultra-high salt rejection rates, they deliver optimal long-term economic performance for desalination systems.
The optimized 34-mil inlet flow channel reduces pressure drop and enhances the membrane element's resistance to fouling and cleaning.
They are widely used in seawater desalination, high-concentration brackish water desalination, boiler feed water, papermaking, textile printing and dyeing, and material concentration.
Product Information
| Model | Stable Rejection | Min Rejection | Permeate Flow | Effective Membrane Area | Spacer Thickness |
| (%) | (%) | GPD(m³/d) | ft2(m2) | (mil) | |
| SW-8040-400HR | 99.8 | 99.7 | 7500(28.4) | 400(37.2) | 34 |
| Testing Conditions | Operating pressure | 800 psi(5.52 MPa) | |||
| Test solution temperature | 25 ℃ | ||||
| Test solution concentration (NaCl) | 32000 ppm | ||||
| PH value | 7-8 | ||||
| Recovery rate of singa le membrane element | 8% | ||||
| Flow range of a single membrane element | ±15% | ||||
| Operating Conditions & Limits | Maximum operating pressure | 1200 psi(8.28 MPa) | |||
| Maximum temperature | 45 ℃ | ||||
| Maximum feedwater flow | Maximum feedwater flow: 8040-75gpm(17m3/h) | ||||
| Maximum feedwater flow SDI15 | 5 | ||||
| Maximum concentration of free chlorine: | ＜0.1ppm | ||||
| Allowed pH range for chemical cleaning | 2-11 | ||||
| Allowed pH range for feedwater in operation | 1-13 | ||||
| Maximum pressure drop per element | 15psi(0.1MPa) | ||||
