EN 
عربى
Category Introduction
The Ultra Low Pressure RO Membrane series is suitable for desalination of surface water, groundwater, tap water, and municipal water sources with concentrations below 2000 ppm.
It achieves high water flux and desalination rates at low operating pressures, reducing operating costs for associated pumps, piping, and vessels, thereby improving economic efficiency.
It is widely used in a variety of industries, including packaged water, drinking water, boiler feed water, food processing, and pharmaceutical manufacturing.
Product Information
| Model | Stable Rejection | Min Rejection | Permeate Flow | Effective Membrane Area | Spacer Thickness |
| (%) | (%) | GPD(m³/d) | ft2(m2) | (mil) | |
| ULP-4040HR | 99.5 | 99.3 | 2200(8.3) | 85(7.9) | 34 |
| Testing Conditions | Operating pressure | 150psi( 1.03MPa) | |||
| Test solution temperature | 2 5 ℃ | ||||
| Test solution concentration (NaCl) | 1500ppm | ||||
| PH value | 7-8 | ||||
| Recovery rate of a single membrane element | 15% | ||||
| Flow range of a single membrane element | ±15% | ||||
| Operating Conditions & Limits | Maximum operating pressure | 600 psi(4.14MPa) | |||
| Maximum temperature | 45 ℃ | ||||
| Maximum feedwater flow | Maximum feedwater flow: 4040-16gpm(3.6m3/h) | ||||
| Maximum feedwater flow SDI15 | 5 | ||||
| Maximum concentration of free chlorine: | ＜0.1ppm | ||||
| Allowed pH range for chemical cleaning | 2-11 | ||||
| Allowed pH range for feedwater in operation | 1-13 | ||||
| Maximum pressure drop per element | 15psi(0.1MPa) | ||||
